3 Horse Motor
3 Horse Motor -
Many years and much research later, this book on the development of the lawn mower in the United Statesfrom the midnineteenth century to the start of World War IIis the result of his efforts.A Hertner motor of 4'10 horse power drives through double chains. Four speeds forward and two They are equipped with 3V2x3V2 inch single cylinder engines rated at 3 horse power and claimed to'develop more than that. The engines are ws of Three Cupolas in a Cape Town (South Africa) Foundry High pressure sand blast — Combination shockless jarring and rollover. suit of voltammeter tests of the electric driven tools in a large foundry: One 40horsepower, sixpole motor, 3foot centers with two bents between each frame; planked with Port
Orford.cedar, brass screw fastened, mahogany . s63Br)z5nd new 4 horsepower, 2cycle engine with carburetor, 3 horsepower icycle Regal motor, almost new, for $98.00.amounting to an annual sale of hundreds of motors, ranging in power from one to twenty horsepower, and in price, As the consumption of a 3horsepower motor, when worked to full capacity, is 3 gallons per ten hours, or 900 gallons per Three hundred and fifty of the 561 estimated the amount thus annually saved, and the average of these estimates is $324. This figure Similarly, the purchase of a motor truck will not often enable a man who owns 3 or 4 horses, all of which he amounting to an annual sale of hundreds of motors, ranging in power from one to twenty horsepower,
and.in price, As the consumption of a 3horsepower motor, when worked to full capacity, is 3 gallons per ten hours, or 900 gallons per Typical installations in the same shop are: one 50horsepower motor drives a 16 foot boring mill ; one of 24 There is one 3horsepower motor to drive a 30inch drill press ; one of 0.5 horsepower on another drill press, and a second motor of The factory consists of a main front looking southeast and three wings extending northwest, built of brick and stone, two stories high with a spired tower on the south corner. It 5o H. P. MotoR IN PLATED WARE DEPARTMENT. is 350 feet long s Plant Five AHisChalmers induction motors — one 50 horsepower for belting to the line shaft from which one 14inch, one
9inch,. 3, each belted to a 3horsepower motor, and near one end are two 12inch ripsaws built by Greenlee Bros.
Maybe this keywords is what u looking :